Features:

• Three Turn Signal Timing Modes - Self Canceling
• Hazard Mode - Non-Self Canceling
• Adds brake light function to turn signals
• Non-Load Dependent Flash Duration: all three modes are flash time constant whether using incandescent or LED lighting
• Dependable Solid-state electronic components.
• Weather Proof - potted with soft cell technology to prevent wire chaffing and damage.

Five Unique Turn Signal Modes of Operation

Mode 1 : Press turn signal button for 1 second, turn signal lights will flash for 7 seconds, then self cancel. This mode is usually used when changing lanes.
Mode 2 : Press turn signal button for 2 seconds, turn signal lights will flash for 20 seconds, then self-cancel. This mode is usually used when slowing down to go around a corner.
Mode 3 : Press turn signal button for 4 seconds, turn signal lights will flash for 75 seconds, then self-cancel. This mode is usually used when stopping at a signal light and turn will be made after stopping.
Note: All three modes above can be cancelled by pressing the same turn signal button a second time.
Mode 4 : Hazard Mode - is available all the time and will flash until cancelled. To engage, press both the left and right turn signal buttons for 1 second. To cancel, press both buttons again for one second. 
Mode 5 : Brake Lights - Applying the brakes will cause the rear Turn Signals to light as long as the brakes are held. If a turn signal is sent to the rear lights at the same time it will have priority over the brake lights and cause the corresponding light to flash. When the turn signal is canceled the brake light will resume.

Which Turn Signal Module do you want? See the differences below!

*Due to the added running lights feature on the Penta-star XP module, please note that if you have turn signal indicators on your dash they will remain partially illuminated at all times while your engine is running, and increase to full intensity when turn signals are in use.

Customer Reviews: