C
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
AYN Smart Module
AYN Smart Module
AYN Smart Module is for the AYN License Plate Frame! This module will ADD functions like

• Hazard Flashers • 'Night Rider' Mode • Sequencing Turn Signals • 4 BackOFF Brake Patterns ...and so much more!
Price: $59.95

The “AYN” Smart Module is All You Need

Adds the following functions to your AYN License Plate Frame (sold separately)

  • 4 User-selected Brake Flashing patterns to Increase conspicuity/visibility
  • Sequential flashing Turn Signals
  • Hazard Flasher mode for Emergency Situations
  • Attention drawing “Night Rider" Mode for stationary events like shows and bike nights
  • Straight forward wiring - Simple connectivity to the AYN Frame
  • The “AYN Smart Module” is designed to work with the “AYN Frame” only
    •

WIRING DIAGRAM - Simple Installation

+ ADDED FUNCTIONS - When installed with the AYN License Plate Frame (sold separately)

 

HAZARD MODE
(Continuous flash for emergencies)

'NIGHT RIDER' MODE
(Sequence from left to right)

TURN SIGNALS
(Left or right signal from middle)

How to engage different Modes:

HAZARD MODE - Turn your right turn signal on, apply your hand or foot brakes and turn your key switch off. When the hazard mode is turned on this way it will continue to flash until your motorcycle is turned back on. This mode will not work while your motorcycle is on for safety reasons.

'NIGHT RIDER' MODE - Turn your left turn signal on, apply your hand or foot brakes and turn your key switch off. When you engage 'Night Rider' mode the LEDs will sequence continually back and forth until you turn your key switch back on. The main use for this mode is to show off your frame and bring more attention to your motorcycle during bike nights or rally's. This mode will not work while your motorcycle is on for safety reasons.

TURN SIGNALS - The frame will give you additional turn signals that sequence from the center and outward for increased visibility while changing lanes or waiting to turn.

+ 4 BRAKE LIGHT FLASH PATTERNS - When installed with the AYN License Plate Frame (sold separately)

 

MODE A (Default)
 MODE B
 MODE C
 MODE D

How to engage different Brake Light Flashing Modes:

The default mode that your AYN frame has is MODE A. If you would like to switch to ANY of the 4 braking flash patterns, simply press your hand or foot brakes the amount of times listed below ( 6x, 9x, 12x or 15x) immediately after you turn on your motorcycle. You will need to wait 10 seconds for the mode you've chosen to take effect.

 

6x forMODE A 1 second rapid WIG WAG (back-forth on either side) then our patented BackOFF sequence (Three slow flashes - Steady for one second - Repeat)
9x forMODE B 1 second rapid WIG WAG (back-forth on either side) then your brakes will remain steady on as long as you are stopped
12x forMODE C Steady on brakes (NO flashing) - This mode will most commonly be needed in the event that your state has a mandatory annual vehicle inspection or during group rides
15x forMODE D Continuous rapid WIG WAG (back-forth on either side) as long as you are stopped

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.