23" LED Flex Strips

23" LED Flex Strips
A Low-Voltage, Flexible Linear Light Strip Made Of 39 High Intensity LED Lights Mounted On A Black PCB Flex Strip!

ABOVE: Full-length shot of a 23" LED Flex Strip
BELOW: Close up shot of a 23" LED Flex Strip

Available in 8 LED colors and Each Comes with a Hook Up Wire (to hook it up to a 12-Volt Source): Amber, Blue, Green, Red, White, Purple, Orange & Teal!
(Jumper Wires are NOT INCLUDED with the 23" LED Flex Strip)

These high intensity LED products are designed to give greater visibility and conspicuity to your vehicle. Mount the whole 23" LED Flex Strip, or cut and mount anywhere you want or need more light. Perfect for Motorcycles, Campers, Trucks, Trailers, RV's, Golf Carts, Signage, Under Counter Lighting and more!

Each strip can be cut (where indicated by the "scissors" icon), up to/into 13 sections and bent at any angle to fit different needs. Adhesive on the back of each strip for easy mounting!

PLEASE NOTE:
Each Flex Strip comes Packaged with a 16" Hook Up Wire.
JUMPER WIRES Are Sold Separately
Please see the section below titled: JUMPER WIRES

05300
Amber 23-inch LED Flex Strip with 16" Hook-Up Wire
Price: $79.95
Quantity:

05305
Blue 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05310
Green 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05315
Red 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05320
White 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05325
Purple 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05330
Orange 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

05335
Teal 23-inch LED Flex Strip With 16" Hook-Up Wire
Price: $79.95
Quantity:

JUMPER WIRES and HOOK-UP WIRES

05340
5" Jumper Wire
(2 Connectors)
Price: $1.49
Quantity:

05345
12" Jumper Wire
(2 Connectors)
Price: $1.49
Quantity:

05350
15" Jumper Wire
(2 Connectors)
Price: $1.49
Quantity:

05355
39" Jumper Wire (2 Connectors)
Price: $1.49
Quantity:

05360
16" Hook-Up Wire (1 Connector)
This wire is needed to hook up your Flex Strip to a 12-Volt power source
Price: $1.49
Quantity:

Features:
Water and Shock Resistant
Dimensions: Length: 24" , Width: 1/2"
Low Power Requirements: 12V DC, 1/2 Amp!
One Year Limited Warranty!

EASY INSTALLATION:
- Cut the Flex Strip (where indicated) into/up to 13 pieces.

- Place each piece onto the chosen area with the adhesive on the back of each strip

- Connect Jumper Wires to each cut section (i.e.: if you cut 1 Flex Strip into 2 pieces, you will need 1 Jumper Wire. If you cut 1 Flex Strip into 3 pieces, you will need 2 Jumper Wires, etc.)

- Attach to 16" Hook-Up Wire (Red Wire to Ground, Black Wire to 12-Volt Power Source).

(Jumper Wires NOT INCLUDED with the 23" LED Flex Strips!)

�2004 Signal Dynamics Corporation