Pentastar Turn Signal Controller w/OEM connector

The Penta-Star™ Module combines the best of both worlds: Our Self Canceling Turn Signal Module™ and our Tri-Star™ Module! The Penta-Star™ Module is a self contained electronic flashing relay which controls your turn signals, as well as a conversion module to make your rear turn signals function as additional brake lights! Perfect for ground up builds with no turn signal systems, or great as a replacement for your existing mechanical turn signal system and brake system! 

Please Note: The Penta-Star™ Module requires momentary push buttons to operate (not included). Latching-type switches, or push to cancel type switches, will not work properly because these types of switches send constant power to you turn signals when on and will defeat the main purpose of the self canceling feature.

Features
• Converts your turn signals into additional brake lights
• No flasher relay needed
• 3 user selected flash periods
• Automatically self-cancels
• Works with LEDs and incandescent
• Hazard flasher feature built in
• Waterproof and heat resistant

Turn Signal Modes
Mode 1 : Press turn signal button for 1 second, turn signal light will flash for 7 seconds, then self cancel. This mode is usually used when changing lanes.
Mode 2 : Press turn signal button for 2 seconds, turn signal light will flash for 20 seconds, then self cancel. This mode is usually used when slowing down to go around a corner.
Mode 3 : Press turn signal button for 4 seconds, turn signal light will flash for 75 seconds, then self cancel. This mode is usually used when stopping at a signal light and turn will be made after stopping.

Note: All three modes above can be cancelled by pressing the same turn signal button a second time.

Mode 4 : Hazard Mode - is available all the time and will flash until cancelled. To engage, depress both the left and right turn signal buttons for 1 second. To cancel, depress both buttons again for one second.

Specifications
Part Number: 01007
Weight: Less than 1lb
Amp Limit: 10 Amp Per Output (20 Amps Max)
System Requirement: 12VDC(-) 
Attachment Method: Included Double Sided Adhesive Pad 
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Package Contents: (1) Penta-Star™ Module, (1) Adhesive Mounting Pad
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters/Splices
Waterproof: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a

Having a difficult time deciding which module best suits your needs? Take a look below to see the differences between them!

FAQ 

What is the Self Canceling Turn Signal Module™? It is a electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand alone flashing relay to vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 amps per output. This module does not require any load equalizers because it is a self-timed electronic relay. Interested? View the complete product description!

What is the Tri-Star™ Module? It is a electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand alone flashing relay to vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 amps per output. This module does not require any load equalizers because it is a self-timed electronic relay. Interested? View the complete product description!